Spectroquant Pharo 300 - Measurements

Operation Spectroquant
®
Pharo 300
116
ba75703d07 04/2014
An intermediary result is displayed
if there are several measure-
ments.
The photometer is ready for the
next measurement.
3 Start the measurement.
The photometer is ready to mea-
sure.
The result is displayed.
If an entered condition is not met,
no measured value is displayed.
4 If necessary, start a new measure-
ment with the method.
Special / Multi wavelengths
16.04.07 9:52
V extract (ml) 10 ml
V sample (ml) 100 ml
Measurement 1 A(665 n) = 0.600
Proceed with <START/ENTER>
2001:Chl a
Chlorophyll a
10 mm
Setup
Method list
Citation form Unit
Special / Multi wavelengths
16.04.07 9:52
Measurement 2
To start measurement, insert cell or press
<START/ENTER>
2001:Chl a
Chlorophyll a
10 mm
Setup
Method list
Citation form Unit
Special / Multi wavelengths
16.04.07 9:52
V extract (ml) 10 ml
V sample (ml) 100 ml
Measurement 1 A(665 n) = 0.600
Measurement 2 A(665 n) = 0.000
1.78
mg/ml
Start new analysis with <START/ENTER>
Setup
Method list
Citation form Unit