Spectroquant Pharo 300 - Reset

Spectroquant
®
Pharo 300 Operation
185
ba75703d07 04/2014
4.17 Reset
You can reset (initialize) the measurement settings or all settings.
Note
The Reset function is available for users of the user group, Administrator
only.
You have the following options of resetting the photometer settings:
 Reset configuration All settings except for the measure-
ment data memory, user-defined
methods and measured blank val-
ues are deleted.
 Delivery condition All settings (including measurement
data memory and user-defined
methods) are deleted and the pho-
tometer is reset to the delivery con-
dition.
The menu where to select the
reset type (Delivery condition /
Reset configuration) is displayed.
1 Select and confirm the reset type.
The reset is carried out.
<HOME>
[General setup]
– Reset