SpectralTransfer Overview
447
01/2012
1 Overview
The SpectralTransfer program is used for the direct data exchange between
the photometer and PC. The SpectralTransfer program requires additional
software on the PC for the data exchange (see section 2.1).
When all programs have been installed, you can:
Save measurement data saved in the photometer in *.csv format to a PC
– Exported measurement datasets from the measurement data memory
(concentration, absorbance, transmission and multi-wavelengths
measurements)
– Spectra
– Kinetic records
Save and transmit user-defined methods
– to a PC from the photometer
– to the photometer from the PC (existing backup data)
Note
All functions can also be executed with a USB memory device connected to
the photometer.
To Next Page
Loading...