Technical data Spectroquant
®
Pharo 300
202
ba75703e07 04/2014
7.2 Measured value documentation and quality assurance
Memory for
measured values
Memory capacity – 1000 single measured values from the
measuring modes, concentration, absor-
bance / % transmission and multi wave-
lengths
– 4 MByte internal memory, sufficient for
approx. 100 spectra and 400 kinetic curves
(sample values based on the following
assumptions: All spectra over a wave-
length range of 600 nm and all kinetic
curves with 150 single values each)
Output options USB memory device, printer, PC
File formats ASCII, *.csv
Monitoring
functions
AQA1 Check of the photometer
AQA2 Check of the total system
AQA3 Check of the sample matrix
User management Can be switched off yes
User accounts 3 hierarchical levels (administrator, user,
guest)
Password protection for administrators and users
To Next Page
Loading...