Spectroquant Pharo 300 - Special; Multi Wavelengths Methods; Basic Information on Special; Multi Wavelengths Measurements

Spectroquant
®
Pharo 300 Operation
105
ba75703d07 04/2014
4.7 Special / Multi wavelengths methods
4.7.1 Basic information on Special / Multi wavelengths measure-
ments
In the Special / Multi wavelengths
mode of the Spectroquant
®
Pharo 300, you
can carry out measurements with special methods and functions.
You can use the following functions for these methods:
 Measurements at different wavelengths
 Multiple measurements at one wavelength (e.g. before and after adding a
reagent)
 Use of procedure variables.
Procedure variables provide a value that has to be entered prior to each
measurement on the photometer (e.g. volume, pH value or temperature)
 Check whether a value meets a condition.
With a condition you can check a value for validity (e.g. absorbance value,
procedure variable or the result of a formula).
 Formula editor for the convenient programming of any user-defined meth-
ods
Special methods The method list in the Special / Multi wavelengths mode comprises:
 preprogrammed multi wavelengths methods
 preprogrammed special methods
 special methods programmed by the user
Note
If you program any special methods yourself, you can use all extended func-
tions of the Special / Multi wavelengths mode.