Spectroquant Pharo 300 - Settings for Data Transmission

To Next Page

To Previous Page

Operation Spectroquant

Pharo 300

158

ba75703d07 04/2014

4.14.2 Settings for data transmission

Settings are possible for the data transmission to a printer or PC.

Decimal separators

for CSV files

For the output of CSV files you can select either a comma or a point as the

decimal separator. The setting is made in the following menu:

<HOME> -> General setup -> Data transfer/Printer -> Decimal separator for

csv-Files -> Comma (12,34) or Point (12.34).

Short and long

version

When printing measurement datasets, you can select a short or long version

with different information contents. The setting is made in the following menu:

<HOME> -> General setup -> Data transfer/Printer -> Data format (print) ->

Short or Extended.

Baud rate for

RS232 interface

The baud rate can be set for printers that are operated at the RS232 inter-

face. Adjust the Spectroquant

Pharo 300 to the baud rate of the printer. The

setting is made in the following menu:

<HOME> -> General setup -> Data transfer/Printer -> Baudrate for RS232

printer -> 1200 ... 19200.

Printer Here you can set which function is assigned to the <PRINT> key:

 Output to a USB printer

 Output as pdf file

The setting is made in the following menu:

<HOME> -> General setup -> Data transfer/Printer -> Function of PRINT key

-> USB printer or PDF file.