Spectroquant Pharo 300 - Login with Active User Management

Operation Spectroquant
®
Pharo 300
182
ba75703d07 04/2014
4.16.4 Login with active user management
To be able to always assign measurement data to a user, the administrator
can activate the user management function. After doing so, the photometer
can only be operated after login with a user name. Depending on the autho-
rization class (administrator, user, guest), important settings are released for
changes or locked.
Note
The user management function is not active in the delivery condition of the
Spectroquant
®
Pharo 300. Every user can carry out all functions.
Activating the user management creates an administrator user account. The
user name is "Administrator". The preset password is "admin".
Change this password as soon as possible.
Make sure to use the correct spelling (upper and lower case) of user name
and password for the login.
After logging in to the Administrator group with a user name, you can create
further users or administrators or switch off the user management function.
The Login window with the Enter user name prompt appears after the meter
has been switched on and after a user has logged off.
In the following example, a user will log in with the user name, "Administra-
tor".