Spectroquant Pharo 300 - Importing Files; Importing Methods; Profiles from a; Importing Spectra or Kinetic Recordings from a; USB Memory Device

Spectroquant
®
Pharo 300 Operation
155
ba75703d07 04/2014
4.13 Importing files
You can import to a Spectroquant
®
Pharospectrophotometer the data that
were created with the same or another Spectroquant
®
Pharo spectropho-
tometer, and the data that were saved to a USB memory device or a PC.
You can import the following data:
 Spectra
 Kinetic recordings
 User-defined methods
 Profiles
4.13.1 Importing spectra or kinetic recordings from a USB memory
device
You can import to the photometer any spectrum or kinetic recording by open-
ing an externally stored spectrum or kinetic recording with the Open function
of the photometer.
4.13.2 Importing methods / profiles from a USB memory device
Note
When importing methods make sure that your photometer supports the
wavelengths of the imported methods.
A list is displayed including all
user-defined methods and profiles
stored in the corresponding sub-
folders of the Exchange directory
on the USB memory device.
All methods and profiles are
checked off with a checkmark. All
methods and profiles checked off
are imported.
<HOME>
[Setup]
– Exchange methods/profiles
/Import from USB memory
device