Spectroquant Pharo 300 - Importing Files from a PC

Operation Spectroquant
®
Pharo 300
156
ba75703d07 04/2014
4.13.3 Importing files from a PC
You can import files from the PC to the photometer in the following ways:
 By means of the "SpectralTransfer" program (user-defined methods only)
(see operating manual of the "SpectralTransfer" program).
The "SpectralTransfer" program and the corresponding operating manual
is provided on the enclosed CD-ROM.
1 If necessary, select individual
methods/profiles with <▲><▼>
and remove the checkmark
with<START ENTER>.
These methods / profiles are
excluded from importing.
2 Start the import with [Import].
A confirmation prompt appears
before any data on the photometer
are overwritten.
A message appears when the
data have been imported.
3 Confirm the message with
<START ENTER>.
The import is completed. The
imported methods / profiles are
available on the photometer.