Spectroquant Pharo 300 - Measuring Reagent Tests with Autoselector

Spectroquant
®
Pharo 300 Operation
67
ba75703d07 04/2014
4.5.4).
4.5.2 Measuring reagent tests with AutoSelector
The method is selected by insert-
ing the AutoSelector.
The photometer is ready to mea-
sure.
1 Open the cell shaft cover.
2 Insert the AutoSelector in the
round cell shaft so it touches the
bottom. When doing so, align the
line mark with the notch at the
front of the round cell shaft.
– The photometer selects the cor-
rect method with the aid of the
barcode.
<HOME>
Concentration
Concentration
16.04.07 9:52
Please select method for measuring or insert
a barcoded cell or insert AutoSelector.
Setup
Method list Last method New Method
Concentration
16.04.07 9:52
To start measurement, insert cell or press
<START/ENTER>
38: 14761
Fe
10 mm
0.05 - 5.00 mg/l
Setup
Method list
Citation form Unit
Line mark
Barcode
Inner
turn-up lid