Spectroquant Pharo 300 - Saving; Exporting Files; Copying All Measurement Data Files to a USB; Memory Device

Operation Spectroquant
®
Pharo 300
152
ba75703d07 04/2014
4.12 Saving / exporting files
If you want to back up or process measurement data files outside the pho-
tometer, you can copy them to external media.
Note
Please follow the instructions on using USB memory devices (see section
4.11.2).
4.12.1 Copying all measurement data files to a USB memory device
Even if no PC is directly connected to the photometer, you can very simply
transfer all measurement data files from the photometer (Internal DataB
folder) to a connected USB memory device.
When the data saving procedure
is finished, a message appears.
1 Confirm the message with
<STORE>.
All measurement data files from
the photometer (Internal DataB
folder)
have been transferred to
the USB memory device.
The complete folder structure from
the photometer is created on the
USB memory device. The individ-
ual measurement data files are
stored in subfolders sorted by
measurement data types.
<HOME>
[Setup]
– Save data to USB memory
device