Commissioning Spectroquant
®
Pharo 300
44
ba75703e07 04/2014
3.4.2 PC/printer
PC and printer can be connected to the photometer as follows:
Note
Suitable are all printers that can interpret the PCL-3 printer control language.
Interface PC Printer Functions
RS232
The data is sent to the interface with
<PRINT>.
If a printer is connected, the data is
printed out.
If a PC is connected, the data can be
received with a terminal program
(see section 4.14).
USB-A
The data is printed out with <PRINT>.
USB-B
-
Enables the direct connection of pho-
tometer and PC. With this you can trans-
mit measurement data to the PC (see
section 4.12 and section 4.14) or update
the photometer software (see section
4.20.1).
The direct connection with the PC is
established with the aid of the "Spectral-
Transfer" program. The program is pro-
vided on the supplied CD-ROM.
More instructions on how to establish
the connection are given in the operat-
ing manual of the "SpectralTransfer"
program (see CD-ROM).
To Next Page
Loading...