Spectroquant Pharo 300 - USB Memory Device

Spectroquant
®
Pharo 300 Commissioning
45
ba75703e07 04/2014
Operation at RS232 Connect the RS232 interface to the devices as follows:
 PC: with a commercially available zero modem cable
 Printer: with a commercially available RS232 printer cable
The cables are available in specialized computer shops.
Set up the following interface data at the PC/printer:
3.4.3 USB memory device
Using a USB memory device (such as a USB flash drive), you can
 update the meter software and method data (section 4.20)
 transmit data to the USB memory device (section 4.11 and section 4.12).
USB memory devices are connected to the USB-A interface.
Note
Please follow the instructions on using USB memory devices (see section
4.11.2).
Baud rate Selectable from 1200, 2400, 4800, 9600, 19200
The baud rate must agree with the baud rate set on
the PC/printer.
Flow control
("handshake")
none
Parity none
Data bits 8
Stop bits 1