Spectroquant
®
Pharo 300 Operation
111
ba75703d07 04/2014
14 Using [Next], accept all entries on
the page and switch to the next
page.
If an error is in the formula, an
error message appears.
The formula editor is only exited
once the error is eliminated.
If necessary, enter the formula for
a condition.
15 Enter any numbers with <0...9>.
Use [Operators] , <▲><▼>
<><> and <START ENTER>
to enter an operator, a function or
a constant.
Use [Variables], <▲><▼>
<><> and <START ENTER>
to select a variable.
The condition is displayed after
each step.
Using <> you can delete the last
element of the condition.
Use [Back] to quit the formula edi-
tor.
16 Complete the condition.
17 Complete the programming of the
method with [Next].
Formula entry
16.04.07 9:52
R = 29.6 * (A665nm - A665nm_2)
Back Operators Variables Next
Condition
16.04.07 9:52
Here you can enter a formula for a condition. The measured
value is only valid if this condition is met.
Back Operators Variables Next
Condition
16.04.07 9:52
A
665 nm
< 2
b5
Back Next
To Next Page
Loading...