EasyManua.ls Logo

Spectroquant Pharo 300 - Page 248

Default Icon
456 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
100687
Cell Test
BOD
Biochemical Oxygen Demand
Add 10 drops of
BOD-3K, reclose,
and mix.
Calculation:
BOD of measurement sample:
Result 1 – Result 2 (measurement sample) = A in mg/l
BOD of blank:
Result 1 – Result 2 (b
lank) = B in mg/l
BOD of original sample in mg/l = A
dilution factor – B
Fill 2 oxygen reaction
bottles each with
pretreated sample
and 2 glass beads to
overflowing. Close
bubble-free with the
slanted ground-glass
stoppers.
Add 5 drops of BOD-1K
and then 10 drops of
BOD-2K, close bubble-
free, and mix for approx.
10 seconds.
Fill the solution into
a round cell.
Fill 2 oxygen reaction
bottles each with inocu-
lated nutrient-salt solu-
tion and 2 glass beads
to overflowing. Close
bubble-free with the
slanted ground-glass
stoppers.
Incubate one bottle
of pretreated sample
and one of inoculated
nutrient-salt solution
closed in a thermostatic
incubation cabinet at
20 + 1°C for 5 days.
Place the cell into the
cell compartment. Align
the mark on the cell with
that on the photometer.
Use one bottle of
pretreated sample
and one of inoculated
nutrient-salt solution
for the measurement
of the initial oxygen
concentration.
After incubation, use
one bottle of pretreated
sample and one of
inoculated nutrient-
salt solution for the
measurement of the final
oxygen concentration.
Measurement of inital
oxygen concentration
= Result 1
(measurement sample)
= Result 1
(blank)
Measurement of final
oxygen concentration
= Result 2
(measurement sample)
= Result 2
(blank)
Quality assurance:
To check the measurement system (test reagents,
measurement device, and handling) Spectroquant BOD
Standard (acc.
to EN 1899), Cat.No. 100718, can be used.
Preparation and incubation:
Determination:
Check the pH of the
sample, specified range
:
pH 6 – 8.
If required, add dilute
sodium hydroxide
solution or sulfuric acid
drop by drop to adjust
the pH.
Reaction time:
1 minute
Release 06/2014 - Spectroquant
®
UV/VIS Spectrophotometer Pharo 300
Measuring 0.5 – 3000 mg/l BOD
range:
0.5 – 3000 mg/l O
2
Expression of results also possible in mmol/l.

Table of Contents