Measuring range: pH 6.4 – 8.8
Place the cell into the
cell compartment. Align
the mark on the cell with
that on the photometer.
Quality assurance:
To check the measurement system (test reagents,
measurement device, and handling) b
uffer solution
pH 7.00 Certipur
®
, Cat.No. 109407, can be used.
Pipette 10 ml of the sam-
ple into a round cell.
Add 4 drops of pH-1,
close the cell with the
screw cap, and mix.
Attention!
The reagent bottle must
be held vertically by all
means!
101744
Cell Test
pH
Release 06/2014 - Spectroquant
®
UV/VIS Spectrophotometer Pharo 300
To Next Page
Loading...