EasyManua.ls Logo

Spectroquant Pharo 300 - Page 432

Default Icon
456 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Release 06/2014
Spectroquant
®
photometers NOVA 60 and Pharo photometers
Instructions for the Preparation of Standard Solutions
Reagents required:
1.02400.0080 Potassium
hydrogen
phthalate GR
for analysis,
volum. standard
1.06404.0500 Sodium chloride
for analysis
EMSURE
®
1.16754.9010 Water for
analysis
EMSURE
®
Standard solution of COD/chloride
Preparation of a chloride dilution solution:
Dissolve 32.9 g of sodium chloride GR with distilled water in a calibra-
ted or conformity-checked 1000-ml volu metric flask and make up to the
mark with distilled water.
The dilution solution prepared according to this procedure has a con-
centration of 20 g/l Cl
-
.
Preparation of a COD/Cl
-
standard solution:
Dissolve 0.850 g of potassium hydrogen phthalate GR with dilution
solution in a calibrated or conformity-checked 100-ml volu metric flask
and make up to the mark with dilution solution.
The standard solution prepared according to this procedure has a con-
centration of 1000 mg/l and 20 g/l Cl
-
.
Further investigational concentrations may be prepared from this stock
solution by diluting accordingly with dilution solution.
Stability:
When stored in a cool place (refrigerator), the dilution solution of 20 g/l
Cl
-
and the standard solution of 10 000 mg/l COD / 20 g/l Cl
-
remain
stable for one month. When stored under appropriate cool conditions
(refrigerator), the diluted standard solutions (investigational concentra-
tions) remain stable - depending on the respective concentration - for
approximately one week to one month.
Standard solution of cyanuric acid
Preparation of a standard solution:
Dissolve 1.00 g of cyanuric acid with distilled water in a calibrated or con-
formity-checked 1000-ml volu metric flask and make up to the mark with
distilled water. The substance is slightly soluble and the dissolution pro-
cess may take several hours.
The standard solution prepared according to this procedure has a con-
centration of 1000 mg/l cyanuric acid.
Further investigational concentrations may be prepared from this stan-
dard solution by diluting accordingly with distilled water.
Stability:
When stored in a cool place (refrigerator), the standard solution of
1000 mg/l and the diluted standard solutions (investigational concentra-
tions) remain stable for one day.
Reagents required:
8.20358.0005 Cyanuric acid
for synthesis
1.16754.9010 Water for
analysis
EMSURE
®

Table of Contents