Operation Spectroquant
®
Pharo 300
56
ba75703d07 04/2014
Note
During mere number entries (such as entering a wavelength), the keys of the
alphanumeric keypad are assigned to the respective numeral only. Each key-
pressing directly enters the numeral (like a pocket calculator).
Special characters Special characters are entered with the <1/*> key.
Operating example:
Entering the ID
The Enter ID input field appears if you press the <STORE> key while the stor-
ing symbol is visible. In the following example a measurement dataset with
the ID "Test" is stored.
Correcting incorrect
entries
Using <>, erase all characters until you have reached the incorrect digit and
repeat the entry from there.
1 Press <8/TUV> several times until
"T" appears in the input line.
Below the input field, a selection
line pops up with all characters
that are available for this key, e.g.
8 T U V t u v.
The currently selected character is
highlighted.
After approx. one second the
character is taken over and the
selection line closed.
2 Complete the ID with <A...9> and
confirm.
Enter ID
8
8 T U V t u v
Enter ID
T
8
T
T U V t u v
To Next Page
Loading...