Operation Spectroquant
®
Pharo 300
76
ba75703d07 04/2014
The entered value for the dilution factor is valid for the selected method only.
The dilution factor is erased if
the photometer is switched off
a different method is selected
the factor 0 is entered in the Dilution menu.
If a dilution factor is active, it is indicated on the display during measurement
in the form [1 + x].
1 Open the setting menu with
[Setup].
2 Select and confirm Dilution.
The input field for the dilution pops
up.
3 Enter and confirm the dilution
(<0...9>).
The entered dilution is taken into
account with the next measure-
ment.
Concentration
16.04.07 9:52
51: 14558
NH
4
-N
16 mm
0.20 - 8.00 mg/l
Setup
Method list
Citation form Unit
Sample + distilled water
1 + _
To Next Page
Loading...