Strautmann Verti Mix Double K - Page 133

Starting up the machine
Verti Mix Double K Edition
133
08.08
Assembly instructions for authorized workshop:
1. Hitching the tractor to the machine (do not connect the PTO
drive shaft).
2. Take up the shortest PTO drive shaft operational position.
3. Secure the tractor against accidental starting and rolling away
before moving into the danger zone between tractor and
machine.
4. Pull the PTO drive shaft apart.
5. Push the locking mechanism of the PTO drive shaft half with the
tractor symbol on the guard tube onto the PTO shaft of the
tractor until the locking mechanism noticeably locks in.
6. Push the locking mechanism of the other PTO drive shaft half
onto the PTO shaft of the machine until the locking mechanism
noticeably snaps into place.
7. Consult the PTO drive shaft operating instructions for information
on determining the length and shortening the PTO drive shaft.
8. Push the shortened halves of the PTO drive shaft into each othe
r
again.
9. Grease the tractor PTO and machine PTO before connecting the
PTO drive shaft.