Machine maintenance and care
11 Machine maintenance and care
Correct maintenance and care according to regulations:
• keeps your machine ready for use for a long time and prevents
early wear and tear,
• reduces downtimes and repairs,
• is a pre-condition for our guarantee provisions.
30
ο when carrying out any work by means of cutoff wheels in
the vicinity of these pipes and lines.
• Monitor the brake, air and hydraulic hose lines very closely for
noticeable defects.
• Special know-how is required for carrying out testing and
maintenance work. This know-how is not imparted by these
operating manual.
• For maintenance and care of the machine please also consult
the information in chapter:
ο "Obligations of the operator", page ,
ο "Qualification of personnel", page 31,
ο "Basic safety instructions", page 34,
ο "Saftey signs and instructional signs", page 47.
Observance of these chapters is in the interest of your safety.
• Only use genuine spare parts.
• When cleaning and servicing the machine take all necessary
steps to protect the environment.
• Comply with the legal requirements concerning the disposal of
fuels and lubricants, such as oil and grease. These legal
provisions also apply to parts coming into contact with those
working materials.
• Before commencing machine maintenance and care, always
disconnect all electric / electronic plug and socket connections to
the tractor. As a basic principle, unhitch the machine from the
tractor during welding work.
• It is essential to take safeguarding, such as shielding electric
power-hydraulic hose-, brake- and supply lines or removing
these lines at particularly critical points:
ο during welding, drilling and grinding,
• The maintenance intervals depend on the frequency of use of
your machine.
Verti Mix Double K Edition
153
08.08
To Next Page
Loading...
