Start machine
9.3.1 Fodder discharge through discharge openings
Fig. 76
. Make sure that people leave the hazardous
area of the machine.
. Keep animals away from the hazardous
area.
. Switch on the p.t.o. shaft.
. Power the mixing auger at the desired
driving speed.
. Slowly open the discharge door (1) via the
hydraulic cylinder (2), until the fodder is
homogeneously coming out of the
discharge opening. The set opening width
of the discharge door is indicated by the
pointer (3) on the scale (4).
. Travel over the feeding table at the desired
travelling speed.
. Finish fodder discharge:
.1 Close the discharge door.
.2 Switch off the p.t.o. shaft.
1
2
3
4
5
6
7
7
7
146
Verti Mix Double K Edition 08.08
To Next Page
