Safety instructions
Verti Mix Double K Edition
41
08.08
Compressed air brake system
• The compressed air systems of tractor and machine must
correspond with each other!
• The seals on the service- and brake-line hose couplers must be
cleaned to remove any dirt before hitching up the machine!
• The hitched-up machine cannot be started until the manometer
on the tractor reaches 5.0 bar!
• Drain the air tank every day!
• Close the hose couplers on the tractor before runs without the
machine!
• Hang up the service- and brake-line hose couplers in the dummy
couplings provided when the machine is uncoupled!
• Use only the specified brake fluid to top-up or refill. Comply with
the relevant regulations when refilling the brake fluid!
• Do not alter the fixed settings on the brake valves!
• Replace the air tank, when:
ο the air tank can be moved around in the tensioned retaining
straps,
ο the air tank is damaged,
ο the type ID plate on the air tank is rusty or loose or missing!
Hydraulic brake system for export machines
• Hydraulic brake systems are not permitted in Germany!
• When refilling or renewing always use the specified hydraulic
oils. Comply with the relevant regulations when renewing the
hydraulic oil!
3.4.7 Axles
Never overload the axles. Overloading the axles reduces the service
life of the axle bearings and damages the axles.
For this reason avoid:
• overloading the machine,
• hitting kerbs,
• driving at too high a speed,
• fitting wheels with incorrect wheel offset,
• fitting outsize wheels and tyres.
To Next Page
Loading...
