Start machine
9.3.5 Elimination of blockages
WARNING
Risk of crushing, shearing, cuts, amputation, becoming
entangled, wound up, being drawn in and risk of impact for
people if:
• lifted, unsecured machine parts accidentally come down or
are lowered unintentionally, e.g. an open discharge door,
• tractor and machine accidentally start and roll away.
• Secure raised machine parts against accidental lowering before
you start work in the vicinity of raised parts.
• Secure the tractor and the machine against accidental starting
and rolling before eliminating any blockages on the machine.
• Wait until the machine stands still before entering the danger
area of the machine.
WARNING
Risk of cuts if people reach into sharp-edged cutting knives of
the mixing auger when eliminating blockages!
When eliminating blockages, beware that sharp-edged cutting knives
of the mixing auger may be within the discharge opening area.
CAUTION
Risk of damage to the machine if you change the sense of
rotation of the tractor’s p.t.o. shaft for eliminating blockages!
Never change the sense of rotation of the tractor’s p.t.o. shaft.
1. Switch off the p.t.o. shaft.
2. Completely open the discharge door of the blocked discharge
opening, if necessary.
3. Secure the tractor and machine against accidental starting and
rolling, for further details see page 126.
4. Eliminate the blockage such that the discharge opening gets free
and the mixed materials can be easily discharged again.
5. Start the tractor engine.
6. Close the discharge door.
7. Switch on the p.t.o. shaft.
8. Power the mixing auger at the desired driving speed.
9. Open the discharge door at the desired opening width and
continue the fodder discharge.
150
Verti Mix Double K Edition 08.08
To Next Page
Loading...
