Safety instructions
3.6 Saftey signs and instructional signs
The following information is fixed to the machine:
• Warnings mark danger spots on the machine and give warning
of residual hazards which cannot be eliminated completely out of
consideration for the reliability of machine functions.
• Instructional signs contain information on proper handling of the
machine.
Always keep these notices in a clean and legible condition! Renew
illegible hazard notices. Quote the order number when requesting saftey
signs and instructional signs:
• from your local dealer,
• directly from the Strautmann spare parts stock
(+ 49 (0) 5424 802-31).
3.6.1 Saftey signs
A saftey sign consists of 2 pictograms:
(1) Pictogram depicting the hazard
The pictogram shows a visual impression of
the hazard within a triangular safety symbol.
(2) Pictogram for the prevention of the
hazard
The pictogram shows visual representation
of hazard prevention instructions.
Fig. 10
Explanations to the saftey signs
The list below shows:
• in the right-hand column, all the saftey signs displayed on the
machine,
• in the left-hand column, the following information on the saftey
signs listed on the right:
1. The order number.
2. The description of the hazard, e.g. "Risk of fingers or hand being
crushed, due to accessible, moving machine parts!"
3. The consequences of disregarding the instructions for avoiding
the hazard e.g. "This hazard can cause severe injuries with loss
of limbs."
4. The instruction(s) for avoiding the hazard, e.g. "Never put your
hands into the danger area, while the tractor motor is running
with the universal drive shaft / hydraulic- / electronic-system
connected. Instruct all persons to leave the danger area of the
machine before you move any machine parts."
Verti Mix Double K Edition
47
08.08
To Next Page
Loading...
