Strautmann Verti Mix Double K - Hitch Pin (Piton-Fix) and Hitch Ring

Structure and Functions
Verti Mix Double K Edition
99
08.08
5.7.4.3 Hitch pin (piton-fix) and hitch ring
1. Secure the tractor against accidental starting and rolling.
2. Secure the machine against rolling away. Take note of the
information in the chapter "Securing tractor and machine against
accidental starting and rolling", page 126.
3. Remove the holding-down device (cross bolt) above the draw
pin.
4. Lower the support stand to support position such that the hitch
ring disengages from the hitch pin.
5. Move the tractor forward (approx. 25 cm).
6. Secure the tractor against accidental starting and rolling.
7. Fix and secure the holding-down device (cross bolt) above the
hitch pin.
8. Disconnect the supply lines.
9. Place the hydraulic hose lines in the hose cupboard.
10. Move the tractor forward.