Start machine
9.1.1 Recommended loading order
• For undoing round or cuboid bales, a higher power is required.
The required power can be reduced by means of a two-gear
switchear (gear level II).
• Recommended procedure for processing round or cuboid bales:
1. Extend the counter-cutters into the mixing container.
2. Fill in round or cuboid bales at slow mixing auger driving
speed.
3. Increase the driving speed of the mixing auger after the
bale has been "undone".
4. Now retract the counter-cutters from the mixing container.
1. Highly-structured fodder components (hay, straw etc.) fill in with
the mixing auger powered.
Have them possibly mixed for a short time before filling in the
next component. A longer mixing ensures better chopping of the
long stalks.
2. Fill in concentrated feed, grain feed etc.
3. Fill in mineral feed via the loading tool (shovel) or via the feed
funnel (optional equipment).
4. Fill in grass silage.
5. Fill in maize silage, grain silage.
. Fill in fodder components with a high proportion of water, e.g.
draff, potato pulp or beet chips.
. Fill liquid components such as liquid yeast, molasses into the
mixing container by means of the loading tool together with the
last portion of maize silage.
6
7
Verti Mix Double K Edition
143
08.08
To Next Page
Loading...
