Strautmann Verti Mix Double K - Safety Devices and Safeguards

Product description
2.2 Safety devices and safeguards
This section shows the layout of the correctly mounted guards in their
protective position.
WARNING
Risk of bodily injury from being crushed, drawn into and caught
when moving machine parts are left unguarded during
operation!
• Only start up a machine with its entire safeguards correctly
mounted.
• Replace defective safeguards immediately.
Fig. 3
(1) Storage yoke for PTO drive shaft
(2) PTO drive shaft guards
(3) Safety cone for drive shaft
(4) Hose cupboard for supply lines
(5) Ladder, platform
(6) Left and right rear protective device for
crossover conveyor
16
Verti Mix Double K Edition 08.08