Safety instructions
Verti Mix Double K Edition
33
08.08
3.3.4 Spare parts and parts subject to wear and tear as well as auxiliary material
Replace machine parts that are not in perfect condition immediately.
Only use genuine parts from the manufacturer or parts authorised by
the manufacturer, enabling the operating permit to retain its validity
under national and international rules. If spare parts and
replacements for worn parts from third-party manufacturers are used,
there can be no guarantee that they are designed and manufactured
to stress or safety requirements.
The manufacturer will accept no liability for damage caused by the
use of unauthorised spare and wearing parts or auxiliary material.
3.3.5 Guarantee and Liability
Our "General conditions of sale and delivery“ always apply. These
must be handed over to the operating company at the latest on
conclusion of contract.
Warranty and liability claims for bodily injury and material damage are
excluded, if they can be traced back to one of more of the following
causes:
• improper use of the machine,
• improper mounting, starting-up, operating and maintaining of the
machine,
• operating the machine with faulty safety devices or incorrectly
mounted or non-functioning safety and protective devices,
• non-observance of the instructions in the operating manual with
regard to start up, operation and maintenance,
• unauthorized modifications to the machine,
• slipshod controlling of machine parts subjected to wear and tear,
• improper repair work,
• catastrophes caused by alien elements and acts of god.