Safety instructions
3.4.3 Electrical System
• Always disconnect the negative terminal of the battery before
carrying out work on the electrical system!
• Only use the fuses specified. The use of stronger fuses can
destroy the electrical system – danger of fire!
• Follow the correct order of procedure carefully when connecting
and disconnecting the battery:
ο Connection: Connect the positive terminal first, then the
negative terminal.
ο Disconnection: Disconnect the negative terminal first, then
the positive terminal!
• Always put the cover provided on the positive terminal of the
battery. Earth connection can cause an explosion!
• Prevent sparks and flames developing near the battery! Dange
of explosion!
• The machine can be fitted with electronic components and parts,
whose functions can be affected by electro-magnetic emissions
from other items of equipment. These effects can endanger
people, if the safety instructions below are not followed:
ο In the case of a later installation of electrical appliances or
components on the machine, with a connection to the on-
board network, the operator is responsible for checking out
whether the installation is causing interference in the
vehicle electronics or other components,
ο Take care that electric and electronic parts installed at a
later point in time comply with the EMV-guideline
89/336/EWG in the relevant valid edition and carry the CE-
sign!
38
Verti Mix Double K Edition 08.08
To Next Page
Loading...
