Black plate (117,1)
一般Model "A2520GE-A" EDITED: 2015/ 10/ 22
Power door locking switch
Power door locking switch
1) Lock
2) Unlock
All doors and the rear gate (Outback) can
be locked and unlocked by the power door
locking switch located at the driver’s side
door.
To lock the doors including the rear gate,
press the front side of the switch.
To unlock the doors including the rear
gate, press the rear side of the switch.
NOTE
. For models with the double locking
system, pressing the rear side of the
power door lock ing switch has no
effect when the double locking system
is activated.
. For Australia models, after locking
all doors and the rear gate (Outback)
using the keyless access function or
remote keyless entry system, pushing
the unlock position of the power door
locking switch has no effect.
& Key lock-in prevention func-
tion (except models with
double locking system)
This function pr events the doors from
being locked under the following condi-
tions.
. The key is still in the ignition switch
(models without “keyless access with
push-button start system”)
. Theignitionswitchisinthe“ON”
position (models with “keyless access with
push-button start system”)
This function’s operational/non-opera-
tional setting can be change d by a
SUBARU dealer. We recommend that
you contact a SUBARU dealer for details.
NOTE
When leaving the vehicle, make sure
that you are holding the key before
locking the doors.
! Behavior with key lock-in preven-
tion function operational
With the driver’s door open, the doors are
automatically kept unlocked even if the
front side of the power door locking switch
is pressed.
! Behavior with key lock-in preven-
tion function non-operational
. If the lock lever is turned to the front
(lock) position with the driver’s door open
and the driver’s door is then closed, the
driver’s door is locked.
. If the spare key is used to lock the
driver’s door from the outside of the
vehicle, the door is locked.
Keys and doors/Power door locking switch
2-7
2
To Next Page
Loading...
