Black plate (365,1)
一般Model "A2520GE-A" EDITED: 2015/ 10/ 22
NOTE
When you dep ress the brake pedal
strongly or suddenly, the following
phenomena occur. However, even
though these occur, they do not indi-
cate any malfunctions, and the brake
assist system is operating properly.
. You might feel that the brake pedal
is applied by lighter force and gener-
ates a greater braking force.
. You might hear sound of the ABS
operating from the engine compart-
ment.
! Emergency stop signal
The emergency stop signal is a function
that automatically blinks the hazard warn-
ing flasher in short intervals when the
brake pedal is depressed suddenly. The
rapid flashing of the hazard warning
flasher cautions the vehicles behind and
reduces the possibility of a collision.
! Operating condition
The emergency stop signal activates
when all of the following conditions are
met.
. The hazard warning flasher is off.
. The vehicle speed is 60 km/h (37 mph)
or more.
. The system judges that sudden braking
has occurred based on the vehicle decel-
eration when the brake p edal is de-
pressed.
! Automatic cancel
The emergency stop signal is canceled in
either of the following circumstances.
. The hazard warning flasher is turned
on.
. The brake pedal is released.
. The system judges that sudden braking
has ended, based on the vehicle decel-
eration.
The operational/non-operational setting of
the emergency stop signal can be chan-
ged by a SUBARU dealer. For details, we
recommend that you contact your
SUBARU dealer.
& Disc brake pad wear warning
indicators
The disc brake pad wear warning indica-
tors on the disc brakes give a warning
noise when the brake pads are worn.
If a squeaking or scraping noise is heard
from the disc brakes while braking, we
recommend that you immediately have
your vehicle checked by your SUBARU
dealer.
Starting and operating/Braking
7-27
7
To Next Page
Loading...
