Black plate (288,1)
一般Model "A2520GE-A" EDITED: 2015/ 10/ 22
5-46
Audio/Bluetooth
®
settings
& Setting Bluetooth details
! BT Devices Connection screen
1. Press the HOME button on the audio
panel.
2. Touch the “SETTINGS” key, and then
touch
tab.
3. Select the desired device to register.
“BT Devices Connect ion” screen (One
device is registered.)
No. Function
&
1
Register the device. Refer to “Regis-
tering/connecting Bluetooth
®
device”
F5-43.
&
2
Make the connection to the registered
device.
No. Function
&
3
Show the status of the device connec-
tion profile. (The icon illuminates while
connected.)
&
4
Delete the registered device. Refer to
“Deleting a Bluetooth device” F5-47.
&
5
Switch to connect/disconnect the
Bluetooth communication. Refer to
“Bluetooth ON/OFF” F5-46.
! Connecting a Bluetooth device
Up to 5 Bluetooth devices (Phones (HFP)
and audio devices (AVP)) can be regis-
tered.
If more than 1 Bluetooth device has been
registered, select which device to connect
to.
1. Display the “BT Devices Connection”
screen. Refer to “BT Devices Connection
screen” F5-46.
2. Select the device to be connected.
. Supported profile icons will be dis-
played.
–
: Phone
–
: Audio device
–
: Smartphone Application (for
Europe)
. Supported profile icons for currently
connected devices will illuminate.
. The audio icon illuminates only
when in the Bluetooth audio mode.
. All icons are dimmed when
Bluetooth is set to off or when the
connection cannot be made with the
device.
NOTE
. It may take time if the device con-
nection is carried out during Bluetooth
audio playback.
. Depending on the type of Bluetooth
device being connected, it may be
necessary to perform additional steps
on the device.
. It is not possible to establish a
Bluetooth connection with iOS devices
currently connected with a USB cable.
. Supported profile icons of the un-
selected devices are not displayed if
several Bluetooth devices have been
registered.
! Bluetooth ON/OFF
1. Display the “BT Devices Connection”
screen. Refer to “BT Devices Connection
screen” F5-46.
2. Select the “ON” or “OFF” key by the
right side of the “BT Devices Connection”
key. The “ON” key establishes a connec-
tion, and the “OFF” key disconnects the
connection.