Black plate (161,1)
一般Model "A2520GE-A" EDITED: 2015/ 10/ 22
Hazard warning flasher
The hazard warning flasher is used to
warn other drivers when you have to park
your vehicle under emergency conditions.
The hazard warning flasher works with the
ignition switch in any position.
To turn on the hazard warning flasher,
press the hazard warning button on the
instrument panel. To turn off the flasher,
press the button again.
NOTE
. When the hazard warning flasher is
on, the turn signals do not work.
. If you depress the brake pedal
suddenly, the hazard warning flasher
may blink rapidly. For details, refer to
“Emergency stop signal” F7-27.
Meters and gauges
NOTE
Liquid crystal displays are used in
some of the meters and gauges on
the combination meter. You will find
their indications hard to see if you wear
polarized glasses.
& Combination meter illumina-
tion
When the ignition switch is turned to the
“ON” position, the various parts of the
combination meter are illuminated in the
following sequence.
1. Warning lights, indicator lights, meter
needles, gauge needles and liquid crystal
display illuminate.
2. Meter and gauge indicati ons eac h
show MAX position.
3. Meter and gauge indicati ons eac h
show MIN position.
4. Dials and indicators in meters and
gauges light up.
5. Regular illumination (for driving) be-
gins.
Instruments and controls/Hazard warning flasher
3-9
– CONTINUED –
3
To Next Page
Loading...
Need help?
General
