Black plate (185,1)
一般Model "A2520GE-A" EDITED: 2015/ 10/ 22
& SI-DRIVE indicator light
(petrol engine models)
1) Intelligent (I) mode
2) Sport (S) mode
3) Sport Sharp (S#) mode (3.6 L models)
This light indicates the current SI-DRIVE
mode.
For details of SI-DRIVE mode, refer to “SI-
DRIVE (petrol engine models)” F7-22.
& Select lever/gear position in-
dicator
! CVT models
1) Upshift indicator
2) Downshift indicator
3) Select lever/gear position indicator
The select lever position is displayed on
the combination meter. Also, when the
manual mode is selected, the gear posi-
tion indicator (which shows the current
gear selection) and the upshift/downshift
indicator light up. Refer to “Selection of
manual mode” F7-20.
! Gear shift indicator (if equipped)
When shifting up is recommended for
good fuel economy, the upshift indicator
blinks. When shifting down is recom-
mended, the downshift indicator blinks.
NOTE
. The gear shift indicator cannot be
deactivated.
. Usually, the gear shift indicator is
guideline for driving more fuel-effi-
ciency and it also may operate to
prevent a possible engine stall at low
engine speed.
. Also, the gear shift indicator oper-
ates to prevent engine damage at high
engine speed.
! MT models
1) Upshift indicator
2) Downshift indicator
3) Gear position indicator
The current gear selection is displayed on
Instruments and controls/Warning and indicator lights
3-33
– CONTINUED –
3
To Next Page
Loading...
