Black plate (454,1)
一般Model "A2520GE-A" EDITED: 2015/ 10/ 22
9-26
In case of emergency/Towing
CAUTION
To prevent deformation to the bum-
per and the towing hook, do not
apply excessive lateral load to the
towing hook.
Front tie-down hooks:
The front tie-down hooks are located
between each of the front tires and the
front bumper.
Rear tie-down holes:
1) Rear tie-down hole
The rear tie-down holes are located near
each of the jack-up reinforcements.
There is a plug in each rear tie-down hole.
To use the rear tie-down holes, remove
the plugs. After using the rear tie-down
holes, return the plugs to their original
places.
WARNING
Use the rear tie-down holes only for
downward anchoring. If they are
used to anchor the vehicle in any
other direction, cables may slip out
of the holes, possibly causing a
dangerous situation.
& Using a flat-bed truck
This is the best way to transport your
vehicle. Use the following procedures to
ensure safe transportation.
1. Shift the select lever int o the “P”
position for CVT models or the shift lever
To Next Page
Loading...
