Black plate (42,1)
一般Model "A2520GE-A" EDITED: 2015/ 10/ 22
1-10
Seat, seatbelt and SRS airbags/Seat heater
& Front seat heater (if
equipped)
Front seat heater switch
1) HIGH mode indicator
2) MID mode indicator
3) LOW mode indicator
A) Left-hand side
B) Right-hand side
Press the front seat heater switch to turn
on the front seat heater. Then select the
“HIGH”, “MID” or “LOW” mode, as desired,
depending on the temperature. Each time
youpresstheswitch,themodewill
change as follows.
You can turn off the front seat heater by
pressing and holding the front seat heater
switch.
When LOW mode is selected, the LOW
mode indicator on the front seat heater
switch illuminates. When MID mode is
selected, both the LOW and MID mode
indicators illuminate. When HIGH mode is
selected, all 3 LOW, MID and HIGH mode
indicators illuminate. When the OFF mode
is selected, all the indicators turn off.
Selecting “HIGH” mode will cause the seat
to heat up quicker.
& Rear seat heater (if equipped)
Rear seat heater switch
1) HIGH mode indicator
2) LOW mode indicator
A) Left-hand side
B) Right-hand side
Press the rear seat heater switch to turn
on the rear seat heater. Then select the
“HIGH” or “LOW” mode, as desi red,
depending on the temperature. Each time
youpresstheswitch,themodewill
change as follows.
When LOW mode is selected, the LOW
mode indicator on the rear seat heater
switch illuminates. When HIGH mode is
selected, both the LOW and HIGH mode
indicators illuminate. When the OFF mode
is selected, all the indicators turn off.
Selecting “HIGH” mode will cause the seat
to heat up quicker.
NOTE
Only the front seat heater switches
retainthepreviousswitchposition
even if the engine has restarted. The
rear seat switch will reset.
To Next Page
Loading...
