Black plate (398,1)
一般Model "A2520GE-A" EDITED: 2015/ 10/ 22
7-60
Starting and operating/Subaru Rear Vehicle Detection (SRVD)
& Handling of radar sensors
Radar sensors (Sedan)
Radar sensors (Outback)
The radar sensors, one on each side of
the vehicle, are mounted inside the rear
bumper.
CAUTION
To ensure correct operation of the
SRVD, observe the following pre-
cautions.
. Always keep the bumper surface
near the radar sensors clean.
. Do not affix any stickers or other
items on the bumper surface
near the radar sensors. For de-
tails, we recommend that you
consult your SUBARU dealer.
. Do not modify the bumper near
the radar sensors.
. Do not paint the bumper near the
radar sensors.
. Do not expose the bumper near
the radar sensors to strong im-
pacts. If a sensor becomes mis-
aligned, a system malfunction
may occur, including the inability
to detect vehicles entering the
detection areas. If any strong
shock is applied to the bumper,
we recommend that you contact
your SUBARU dealer for inspec-
tion.
. Do not disassemble the radar
sensors.
To Next Page
Loading...
