Black plate (358,1)
一般Model "A2520GE-A" EDITED: 2015/ 10/ 22
7-20
Starting and operating/Continuously variable transmission
2. Remove the shift lock cover using a
flat-head screwdriver.
3. While depressing the brake pedal,
insert the screwdriver into the hole, press
the shift lock release button using the
screwdriver, and then move the select
lever.
NOTE
To prevent damage to the shift lock
cover, cover the tip of the flat-head
screwdriver with vinyl tape or a cloth
before removing the cover.
If the select lever does not move after
performing the above procedure, the shift
lock system may be malfunctioning. We
recommend that you contact a SUBARU
dealer for an inspection as soon as
possible.
& Selection of manual mode
With the vehicle either moving or station-
ary, move the select lever from the “D”
position to the “M” position to select the
manual mode.
1) Upshift indicator
2) Downshift indicator
3) Gear position indicator
When the manual mode is selected, the
gear position indicator and upshift indica-
tor and/or downshift indicator on the
combination meter illuminate. The gear
position indicator shows the currently
selected gear in the following ways.
. Petrol engine models: 1st-to-6th-gear
range
. Diesel engine models: 1st-to-7th-gear
range
The upshift and downshift indicators show
when a gearshift is possible. When the
upshift indicator “
” is on, upshifting is
possible. When the downshift indicator
“
”is on, downshifting is possible. When
To Next Page
Loading...
