Subaru Outback 2016 - Windshield Wiper and Washer Switches

Black plate (219,1)
一般Model "A2520GE-A" EDITED: 2015/ 10/ 22
tion or high speed position,
although the wipers will switch to
the automatic operation with the
wiper switch in the “AUTO” position
if the ambient temperature returns
to more than −108C (148F).
– The wipers may not operate if the
temperature around the rain sensor
is more than 808C (1768F) because
the system cannot detect the
amount of raindrops under these
temperatures.
& Windshield wiper and washer
switches
The wiper operates only when the ignition
switch is in the “ON” position.
! Windshield wipers (models with
automatic rain sensing windshield
wipers)
Except Australia models
Australia models
/ MIST: Mist (for a single wipe)
/ OFF: Off
/ AUTO: Automatic operation
/ LO: Low speed
/ HI: High speed
To turn the wipers on, push the wiper
control lever down. With the wiper switch
in the “AUTO” position, the wipers operate
automatically when the rain sensor de-
tects falling rain. The wiper timing is
automatically adjusted depending on the
amount of rain.
To turn the wipers off, return the lever to
the “OFF”/“
” position.
For a single wipe of the wipers, push the
lever up. The wipers operate until you
release the lever.
Instruments and controls/Wiper and washer 3-67
– CONTINUED –
3