Black plate (165,1)
一般Model "A2520GE-A" EDITED: 2015/ 10/ 22
& Temperature gauge
1) Normal operating range
The temperature gauge shows engine
coolant temperature when the ignition
switch is in the “ON” position.
The coolant temperature w ill var y in
accordance with the outside temperature
and driving conditions.
We recommend that you drive moderately
until the pointer of the temperature gauge
reaches near the middle of the range.
Engine operation is optimum with the
engine coolant at this temperature range.
Avoid high revving operation when the
engine is not warmed up enough.
CAUTION
If the pointer exceeds the normal
operating range, safely stop the
vehicle as soon as possible.
Refer to “Engine overheating” F9-
23.
& ECO gauge
The ECO gauge shows the difference
between the current rate of fuel consump-
tion and the average rate of fuel consump-
tion since the trip meter was last reset.
The ECO gauge indicates the current fuel
efficiency as shown in the following chart.
Displayed unit
Needle position
“+” side “-” side
MPG
Better Poorer
km/l
l/100km Poorer
Better
NOTE
. T he ECO gauge shows only an
approximate indication.
. After resetting the trip meter, the
average rate of fuel consumption is not
shown until driving 1 km (0.6 mile).
Before that time, the ECO gauge does
not operate.
Instruments and controls/Meters and gauges
3-13
3
To Next Page
Loading...
