Black plate (44,1)
一般Model "A2520GE-A" EDITED: 2015/ 10/ 22
1-12
Seat, seatbelt and SRS airbags/Rear seats
A) When not used (lowest position)
B) When used (click position)
Window side seating position
1) Head restraint
2) Release button
Center seating position
1) Head restraint
2) Release button
To raise:
Pull the head restraint up.
To lower:
Push the head restraint down while
pressing the release button on the top of
the seatback.
To remove:
While pressing the release button, pull out
the head restraint.
To install:
Install the head restraint into the holes that
are located on the top of the seatback until
the head restraint locks.
When the seats are not occupied, lower
the head restraints to improve rearward
visibility.
& Reclining the seatback
(Outback)
WARNING
To prevent the passenger from slid-
ing under the seatbelt in the event of
a collision, observe the following
precautions:
. Put the seatback in the upright
position while the vehicle is in
motion.
. Do not place ob jects such as
cushions between the passenger
and the seatback.
Otherwise, the risk of sliding under
To Next Page
Loading...
