Black plate (533,1)
一般Model "A2520GE-A" EDITED: 2015/ 10/ 22
4. Remove the lens by prying the tab of
the lens with a flat-head screwdriver.
5. Pull out the bulb.
6. Install a new bulb.
7. Reinstall the lens.
8. Reconnect the electrical connector.
9. Reinstall the trunk light assembly.
& Other lights on the vehicle
It may be difficult to replace the bulbs
of other lights on the vehicle. We
recommend that you have the bulbs
replaced by your SUBARU dealer if
necessary.
Replacing battery
The access key / transmitter battery may
be discharged under the following condi-
tions.
. The operation of the keyless access
function is unstable
. The operating distance of the remote
keyless entry system is unstable
. The transmitter does not operate prop-
erly when used within the standard dis-
tance
Replace the battery with a new one.
CAUTION
. Do not let dust, oil or water get on
or in the access key/transmitter
when replacing battery.
. Be careful not to touch or da-
mage the printed circuit board in
the access key/transmitter when
replacing the battery.
. Be careful not to allow children to
touch the battery and any re-
moved parts; children could
swallow them.
. Danger of explosion if battery is
incorrectly replaced. Replace
only with the same or equivalent
Maintenance and service/Replacing battery
11-61
– CONTINUED –
11
To Next Page
Loading...
Need help?
General
