Black plate (169,1)
一般Model "A2520GE-A" EDITED: 2015/ 10/ 22
itored by the warning light, refer to “SRS
airbag system monitor” F1-73.
& Front passenger’s frontal
airbag ON and OFF indica-
tors (if equipped)
1) Front passenger’s frontal airbag OFF
indicator
2) Front passenger’s frontal airbag ON
indicator
The front passenger’s frontal airbag ON
and OFF indicators show you the status of
the front passenger’s SRS frontal airbag.
The indicators are located as shown in the
illustration.
When the ignition switch is turned to the
“ON” position, both the ON and OFF
indicators illuminate for 6 seconds during
which time the system is checked. Follow-
ing the system check, both indicators turn
off for 2 seconds. After that, one of the
indicators illuminates depending on the
status of the front passenger’s SRS frontal
airbag determined by the frontal airbag
system monitoring.
If the front passenger’s SRS frontal airbag
is activated, the passenger’s frontal airbag
ON indicator will illuminate while the OFF
indicator will remain off.
If the front passenger’s SRS frontal airbag
is deactivated, the passenger’sfrontal
airbag ON indicator will remain off while
the OFF indicator will illuminate.
With the ignition switch turned to the “ON”
position, if both the ON and OFF indica-
tors remain illuminated or off simulta-
neously even after the system c heck
period, the system is malfunctioning. We
recommend that you contact your
SUBARU dealer immediately for an in-
spection.
& Malfunction indicator
light (Check Engine
light)
! Models equipped with OBD system
Vehicles sold in Europe are equipped with
an enhanced on-board diagnostics sys-
tem called OBD that monitors the perfor-
mance of the vehicle’s emission control
system.
Vehicles sold in some countries outside
Europe may be equipped with the OBD
system. We recommend that you ask your
SUBARU dealer to ascertain whether your
vehicle has the OBD system.
The OBD system helps to protect the
environment by ensuring that emissions
are at acceptable levels for the life of the
vehicle.
If the malfunction indicator light illuminates
steadily or blinks while the engine is
running, it may indicate that there is a
problem or potential problem somewhere
in the emission control system and that
service is required. The OBD system also
assists your service technician in properly
diagnosing any malfunction.
Instruments and controls/Warning and indicator lights
3-17
– CONTINUED –
3
To Next Page
Loading...
