EasyManua.ls Logo

Subaru Outback 2016 - Checking the Fluid Level; Clutch Fluid (MT Models); Recommended Brake Fluid

Subaru Outback 2016
593 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Black plate (502,1)
Model "A2520GE-A" EDITED: 2015/ 10/ 22
11-30
Maintenance and service/Clutch fluid (MT models)
1) MAX level line
2) MIN level line
A) The brake fluid level must be checked in
this area.
Check the fluid level monthly.
Check the fluid level on the outside of the
reservoir. Be sure to check the fluid level
for the brake system at the front part of
the reservoir (shaded area in the illustra-
tion). For MT models, this reservoir is
used for both the brake and clutch
systems and has chambers for each
system. If the fluid level is below MIN,
add the recomm ended brak e fluid to
MAX.
Use only brake fluid f rom a sealed
container.
& Recommended brake fluid
Refer to Fluids F12-11.
CAUTION
Never use different brands of brake
fluid together. Also, avoid mixing
DOT 3 and DOT 4 brake fluids even if
they are the same brand.
Clutch fluid (MT models)
& Checking the fluid level
WARNING
Never let clutch fluid contact your
eyes because clutch fluid can be
harmful to your eyes. If clutch fluid
gets in your eyes, immediately flush
them thoroughly with clean water.
For safety, when performing this
work, wearing eye protection is
advisable.
CAUTION
. Clutch fluid absorbs moi sture
from the air. Any absorbed moist-
ure can cause improper clutch
operation.
. If the vehicle requires frequent
refilling, there may be a leak. If
you suspect a problem, we re-
commend that you have the
vehicle checked at your SUBARU
dealer.
. When clutch fluid is added, be
careful not to allow any dirt into
the tank.
. Never splash the clutch fluid over

Table of Contents

Other manuals for Subaru Outback 2016

Related product manuals