Black plate (236,1)
一般Model "A2520GE-A" EDITED: 2015/ 10/ 22
4-6
Climate control/Manual climate control
the instrument panel and some through
windshield defroster outlets (A small
amount of air flows to the windshield and
both side windows to prevent fogging.)
A) Models with rear ventilators
(Heat-def): Windshield defroster outlets,
foot outlets and both side outlets of the
instrument panel
A) Models with rear ventilators
(Defrost): Windshield defroster outlets and
both side outlets of the instrument panel
NOTE
The illustrations shown are for left-
hand models. For right-hand models,
the locations are opposite to those in
the illustrations.
& Temperature control
Turn the temperature control dial over a
range from the blue side (cool) to red side
(warm) to regulate the temperature of
airflow from the air outlets.
! MAX A/C mode
Press the “MAX A/C” button to select the
MAX A/C mode.
When this mode is selected, some of the
settings will be changed as follows.
. The temperature setting will be chan-
ged to the maximum cooling mode.
. The fan speed setting will be changed
to the maximum speed.
. The airflow mode setting will be chan-
ged to the “
” (ventilation) mode.
. The air inlet selection mode will be
changed to the ON position (recirculation).
. The air conditioner will turn on.
While the MAX A/C mode is selected,
pressing the “MAX A/C” button again
returns the system to the setting that had
been selected before the MAX A/C mode
is selected.
! “DUAL” mode
You can change the setting of the driver’s
side and front passenger’s side tempera-
ture independently by selecting the
“DUAL” mode.
You can select the “DUAL” mode by
performing either of the following proce-
dures.
. Press the “DUAL” button
. Turn the passenger’s side temperature
control dial
The “DUAL” mode can be canceled by
pressing the “DUAL” button.
To Next Page
Loading...
