Subaru Outback 2016 - Auto-Dimming Mirror (if Equipped); Inside Mirror; Mirrors

Black plate (226,1)
一般Model "A2520GE-A" EDITED: 2015/ 10/ 22
3-74 Instruments and controls/Mirrors
Mirrors
Always check that the inside and outside
mirrors are properly adjusted before you
start driving.
& Inside mirror
The inside mirror has a day and night
position. Pull the tab at the bottom of the
mirror toward you for the night position.
Push it away for the day position. The
night position reduces glare from head-
lights.
& Auto-dimming mirror (if
equipped)
WARNING
To ensure safety, always adjust the
mirrors and operate the switch be-
fore driving the vehicle. Perform the
automatic dimming on/off operation
only when necessary. Otherwise, an
unexpected accident may occur.
CAUTION
. When cleaning the mirror, use a
paper towel or similar material
dampened with glass cleaner. Do
not spray glass cleaner directly
on the mirror because that may
cause the liquid cleaner to enter
the mirror housing and damage
the mirror.
. Sensors detecting brightness are
located in front of and behind the
mirror. Do not attach any object
such as a sticker on the sensor
areas or put any object over the
mirror.
! How to use the auto-dimming mir-
ror
1) LED indicator
2) Automatic dimming on/off switch
3) Sensor
1. Move the main body of the auto-
dimming mirror and adjust the position
so that you can view the rearward direc-
tion sufficiently.
2. Press the automatic dimming on/off
switch to turn the automatic dimming
function on or off. When the automatic
dimming function is on, the LED indicator
will illuminate.