Black plate (212,1)
一般Model "A2520GE-A" EDITED: 2015/ 10/ 22
3-60
Instruments and controls/Headlight beam leveler
& Manual headlight beam leve-
ler (models without LED
headlights, if equipped)
1) Raises the level of the headlight beam
2) Lowers the level of the headlight beam
You can manually adjust the headlight
beam level depending on the vehicle load
balance. Increasing the dial position in the
order of 0 to 5 will lower the headlight
beam level.
Adjust the headlight beam level with the
following dial positions according to the
number of passengers and load condition.
CAUTION
. Please use the appropriate dial
position according to the follow-
ing tables. Otherwise, your vehi-
cle may not light the road in front
of your vehicle sufficiently, or the
surrounding vehicles may ex-
perience too much glare.
. The "Use in special case" posi-
tion should only be used in cases
such as when driving on a sloped
road, where the headlights of
your vehicle are shining on the
mirror of vehicles in front of you
or on the windshield of oncoming
vehicles.
To Next Page
Loading...
Need help?
General
