EasyManua.ls Logo

Subaru Outback 2016 - Recommended Grade and Viscosity

Subaru Outback 2016
593 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Black plate (493,1)
Model "A2520GE-A" EDITED: 2015/ 10/ 22
(2) Turn the headlight switch to the
following position.
–“
position (except Australia
models)
–“
position (Australia models)
Except Australia models
Australia models
(3) Push the rear window defogger
switch to OFF.
(4) Turn the headlight switch to the off
position.
(5) Repeat steps (1) through (4) once
more, and go to next step.
(6) Release the brake pedal.
NOTE
Each step between (1) through (6) must
be operated within 4 seconds.
Preheating indicator light
5. Pr eheating indi cator light wi ll bli nk
approximately 5 seconds when the data
was reset successfully.
& Recommended grade and
viscosity
CAUTION
Use only engine oil with the recom-
mended grade and viscosity.
Refer to Engine oil F12-5.
NOTE
Engine oil viscosity (thickness) affects
fuel economy. Oils of lower viscosity
provide better fuel economy. However,
Maintenance and service/Engine oil
11-21
CONTINUED
11

Table of Contents

Other manuals for Subaru Outback 2016

Related product manuals