Black plate (351,1)
一般Model "A2520GE-A" EDITED: 2015/ 10/ 22
& When access key does not
operate properly
Refer to “Access key – if access key does
not operate properly” F9-28.
Manual transmission
The manual transmission is a full synchro-
mesh, 6-forward-speed and 1-reverse-
speed transmission.
The shift pattern is shown on the shift
lever knob.
1) Slider
You must raise the slider and hold it in that
position before you move the shift lever to
the “R” position.
To change gears, fully depress the clutch
pedal, move the shift lever, and gradually
let up on the clutch pedal.
If it is difficult to shift into gear, put the
transmission in neutral, release the clutch
pedal momentarily, and then try again.
Starting and operating/Manual transmi ssion
7-13
– CONTINUED –
7
To Next Page
Loading...
